What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 24.06.2025 10:49
What is lightning?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Mysterious sphere named Teleios found floating in the Milky Way - Earth.com
what exactly is a ‘surge’ protector?
For this case there are devices called Metal oxide varistors (MOV).
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Aryna Sabalenka Releases Statement Amid Backlash Over Coco Gauff Comments - Sports Illustrated
This is the picture of an electronic coil of wire wound around a core of magnetic material.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
nine
Edit 2024–10.
He then asserts :
These are simplified answers to the original question, and does not change anything I wrote above.
Why is my crush beautiful to me but not to others?
But it can get overloaded, and no longer works.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
One Of The Rarest Video Games Ever Has Been Preserved Online - GameSpot
This is where the MOV conducts again, and dissipated the energy.
In schematic diagrams this is the symbol for a fuse:
He then describes the function of a fuse.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Because the load is inductive, the current lags the voltage.(by a bit).
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
but this device (an Inductor) … impedes the rapid changes in the current.
Why aren't you a Trump supporter?
These devices are installed between the “hot” and “neutral” and protective ground.
It also is a device that limits the change in current flow.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
How did you adjust to civilian life after your military service in the British Army?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
What does a fuse do?
The MOV will conduct when the voltage exceeds 50% of line voltage.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
[image of Common-mode choke]
This one hit behind the barn.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
There are two important concepts here.
2024–10–10[John johnson John Johnson ]
I post the exact comment here.
At least they know the answer if they wanted it.
The bolt then partially travels down the line to your home.
He then describes Rainy Season and Lightning.
There are three different concepts here that are getting confused.
Here is a simplified AC power diagram.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Upvotes:
At one ohm, the resistor has a maximum of 1 watt power.
The other is “what does a “fuse” do?”
2024–10–16 [ OO OLAOYE OYEBODE ]
the problem then depends on "how fast does the fuse operate?".
Now when you have a certain ac resistance, then a current flows in a loop.
Barnstars:
First Sentence:
But… the neutral is now “floating” because of the 1 ohm resistance.
One is “what exactly is in a ‘surge protector’ ? ”
[old diagram got deleted by accident]
It seems Mohan does not understand the difference between a comment and an Answer.
The third is lightning and “how it gets conducted into a home.”
(Dc diagram shown, AC is similar).
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is where this question deviates from being a 'generic' question, and becomes more specific.
so, what happens?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
A fuse is a non-resetable over current circuit protector.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
eight
a photo is worth a thousand words.
A circuit breaker is similar, but is resettable.
This is 'the assistant's answer'
This device then solves the entire problem.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
An AC voltage/ current source, and an ac inductive load.
but I think this circuit , shows a few more pieces.
One